dimensional and wall thickness measurements
PRODUCTS
Accurate Magnetic Thickness Gauge
Height Gauge
Circometer and Caliper
Base Clearance Gauge
Glass Bottle Lightening System
Preform Cutter
Preform & Bottle Measuring System
Perpendiculary Gauges
Thickness Gauges
Fill Hight Gauges, Fill Hight Syringe
Automated Preform & Bottle Dimension Tester
Gauge Data Transportation Box
PBMS Preform & Bottle Measuring System
Description
The Preform & Bottle Measuring System is an automatic
instrumentfor testing the general dimension of preforms and bottles, PET andGLASS. The instrument is
designed according to the principle ofoptical confocal chromatic and optical multi-lens refraction
andsegmented imaging, and multi-segment parallel light is used toilluminate the preform or bottle to obtain
the entire contour image.The contour is extracted with high accuracy definition, which ensuresthat the
contour is not deformed and the measurement accuracy isensured. At the meantime, by rotating the preform,
and according tothe variation of refraction and reflection when the light passesthrough the preform or
bottle, the thickness variation of the preformis calculated based on the principle of light propagation
.Autopositioning and measuring the dimensions of the preform, not only theregular dimensions like neck
diameter, thread diameter and the outerdiameter of locking ring, etc., but also the flashing,
concentricityand overall height, etc
"A" Tamper Band Dia.
"B" PP Band Diameter
"C" Thread Projection
"D" Distance Tamper Band
"E" Neck Dia.
"F" Flashing
"G" PP Band Clearance
"H" Distance Thread End
"I" Neck Inner Dia.
"L" Overall height
"O" OD Band Thickness
"R" Seal Radius
"S" Distance Thread Start
"T" Thread Dia.
"U" WT Difference*1
"V" Thread Tip Width
"W" Concentricity
"X" Finish Height
"Y" Thread Angle
"Z" OD Band Dia.
Wall
thickness
"A" Tamper Band Dia.
"B" PP Band Diameter
"C" Thread Projection
"D" Distance Tamper Band
"E" Neck Dia.
"F" Flashing
"G" PP Band Clearance
"H" Distance Thread End
"I" Neck Inner Dia.
"L" Overall height
"O" OD Band Thickness
"R" Seal Radius
"S" Distance Thread Start
"T" Thread Dia.
"U" WT Difference*1
"V" Thread Tip Width
"W" Concentricity
"X" Finish Height
"Y" Thread Angle
"Z" OD Band Dia.
"N" Preform body outer Dia.
"BD" Bottle body Outer Dia.
Characteristics
- The instrument is designed according to the principle of
optical
confocal chromatic and optical-lens refraction and segmented imaging, and multi-segment
parallel
light is used to illuminate the preform or bottle to obtain the entire contour image
- Optimal light source design, auto filter the shrinkage and
grain
effects caused by the injection molding of the preform.
- Custom-made finish spacers according to the finish sizes, easy
to
replace, ensure accuracy
- Preform or bottle rotation by servo motor
- Positioning by the inherent characteristic points of the
preforms, so
that to standardize the measurements of all the preforms
- Modular design, which is easier in installation, more
convenient to use
and higher accuracy and stability
- System adopts measurement modular management function, and
improves the
measurement accuracy sub-pixel image processing technology of planting technology
- Measuring and data management Software is built in.
Technical Specifications
- Sample dia.: ≤ Φ150mm
- Sample height range: 0 - 380mm
- Measuring Range : up to 6mm for PET, 15mm for
Glass
- Measure scope: General dimension of preform and
bottles (including wall thickness difference, inner diameter and thread angle)
- Photographing Chip: 10 Million Pixels, Black and
White Coms
- Lens: confocal chromatic and optical combination
- Display: computer
- Measuring Accuracy: 0.002mm / 2µ
- Repeatability accuracy: ±0.001mm 1 µ
- Operation time: 35 - 90 s depending on settings
and samples
- Interface Type: USB 2.0/3.0, Gigabit Network
- Operation System: Windows
- Languages: English / French, others on request (
with possible options )
- Power Supply: AC 110V / 220V 50Hz/60Hz
- Working Ambient Temperature: 10 – 36°C
- Working Ambient Humidity: 20 - 60% Rh, No
Condensation
01
